Maganin Laser Yanke Domin Keɓaɓɓen Keɓaɓɓiyar Motar Kebul

Injin yanke bututu na Laser yana da fa'ida ta musamman na sarrafa Cross Car Beams (katako na mota) saboda su abubuwa ne masu rikitarwa waɗanda ke ba da gudummawa mai mahimmanci ga kwanciyar hankali da amincin kowane abin hawa da ke amfani da su. Saboda haka ingancin samfurin da aka gama yana da mahimmanci. Kamar yadda kowane katako a cikin abin hawa, suna tabbatar da cewa ba za su matse sashin fasinja ba a yayin haɗuwar gefe. Motocin Cross Car kuma suna goyan bayan matuƙin jirgin ruwa, jakunkunan iska, da faifan allo gaba ɗaya. Dangane da ƙirar, zamu iya kera wannan ɓangaren maɓallin daga ƙarfe ko aluminium, kuma injin yanke laser yana yin kyau don yanke waɗannan kayan.

 

 

Kamfanin Motoci na Hyundai sanannen kamfanin mota ne a Koriya, wanda ya himmatu ga zama abokin rayuwa a cikin motoci da bayan sa. Kamfanin - wanda ke jagorantar Kamfanin Motocin Hyundai, sabon tsarin kasuwanci wanda ke iya yaɗa albarkatu daga narkakken ƙarfe zuwa motocin da aka gama. Don inganta ingancin samar da su da haɓaka kayan aikin su, kamfanin ya yanke shawarar gabatar da injin yanke laser.

Abokin ciniki bukatun

1. Samfurin abokin ciniki bututu ne ga masana'antar kera motoci, kuma yana buƙatar babban aiki da sarrafa kansa.

2. bututu diamita ne 25A-75A

3. A ƙãre bututu tsawon shi ne 1.5m

4. Tsawon bututun da aka raba shine 8m

5. Bayan Laser sabon, shi buƙatun cewa robot hannu zai iya kai tsaye ansu rubuce-rubucen da ƙãre bututu domin follow-up lankwasawa kuma latsa aiki.

6. Abokin ciniki da bukatun ga Laser sabon daidaito da kuma yadda ya dace, kuma matsakaicin aiki gudun ba kasa da 100 R / M.

7. The sabon sashe bã ya da wani Burr

8. Da'irar da aka yanke yakamata ta kasance kusa da madaidaiciyar da'ira

Maganin Laser na Zinare

Bayan nazari mai zurfi, mun kafa ƙungiyar bincike ta musamman gami da sashen R&D da manajan samar da kayanmu don gano mafita ga buƙatun yanke katako na mota.

 

A kan tushe na P2060A, mun ƙera injin P2080A bututun laser don cika buƙatunsu na yanke bututu mai tsawon 8 da lodin atomatik.

                                                                                                                                                                                                                              Pipe Laser Cutting MachineP2080A

 

A ƙarshen tattara kayan, ya ƙara hannun robot ɗaya don kwace bututu. Don tabbatar da yanke madaidaiciya, kowane yanki yakamata a ɗaure shi da hannun robot kafin a yanke.

Bayan yankan, hannun robot zai isar da bututu zuwa hanyoyin gaba don latsawa da lanƙwasa.

Yakamata a yanke ramukan lanƙwasa lanƙwasa ta injin injin laser .