History tells us brands can come back from the brink of a company crisis, yet it takes serious and long-term communications, vision and commitment to get there
Conway’s Catering & Deli is based in Maryville and is owned and operated by the award-winning Chef Lee Conway and his wife, Colleen. Conway’s Catering strives to bring the freshest flavors to fit personal tastes and budgets. Visit conwaycateringcompany.com or call (618) 346-7102 for more information. Runners-up: Bella Milano-O’Fallon, Shorty’s Smokehouse
Hans-Peter Neth – MD of Retecon Machine Tools The excitement of this large exhibition is never ending. The pace at which all manufacturers are developing, upgrading and exhibiting their latest technologies is stimulating and incredible.
I wonder if a magnetic lens like the ones in an electron microscope could be used to help shape the field for greater resolution. It might require some calibration to eliminate the interference from the lens so that the only fields sensed would be from the object source.
Put that same bus on an upgrade of say 5% [a 5% grade is five feet vertical rise in 100 feet, not an angle of 5% from the horizontal, incidentally] and the hp requirement zooms up to 400. Kick the grade up to 7% and the hp demand goes to over 480. Where the fuel burn on the flat might be 7.5 gal/hr on the flat, it will just zoom to 40 gph on a steep grade. You see the problems. And laden trucks are even more consumptive.
Did you see the next two videos? The coil was replaced with litz wire. It more efficiently transfers energy without heating up and I used good enough insulation around the solder pot to keep the heat from transferring to the coils. The 14AWG wire used is just fine for the length of time the machine is used. They are cool to the touch even after running the machine for 10 minutes straight. The machine will only run for about 1 minute at a time anyway because the insulation is effectively keeping the solder in a liquid state for up to an hour after the power has been removed. I will probably replace the 14AWG with litz wires before I build the enclosure, but the wires are just fine for now. I also made an induction graphite crucible attachment in my most recent video. You spoke too soon. The smoke in the video is the flux, not the lead. It does not smoke when using a solder bar, but I ran out so I just added rosin core solder to the pot. Realize the boiling point of lead is about 3180F at standard pressure, so this is hardly giving off lead vapors if any at all. In the second video, I am running the machine hotter than necessary for the demonstration. I wanted to show the multicolor oxidation layers that aren’t as vibrant at lower temperatures. I normally cut the power once it hits 1000 degrees fahrenheit. Not hot enough for lead vapor to exist.
China’s voracious appetite for iron ore helped to drive economic booms in Australia, Brazil and other supplier countries. Mills bought Western and Japanese smelter technology.
“As a black male independent entrepreneur, class, money, and race play a silent yet very vocal role in my entire life, including my career. I am a tall, dark-skinned guy and EVERY day, white and other POC question my presence in certain environments based on the race, (stylish) dress or speech, whether at the airport lounge or a potential investor meeting. I have never let that stop me.”—Victor Glemaud, designer
“My dad, Jack, bought out my grandfather’s share in 1961,” he says, while Bob Dyer, Philip A. Ley’s son-in-law, bought the remaining shares. The two worked as business partners until Jack’s retirement in 1999.
According to CNBC, Koh “hinted that more details of the device could be unveiled this year at the Samsung Developer Conference in November in San Francisco,” but stopped short of divulging when it would actually go on sale. Koh said that the new phone’s development process has “nearly concluded.”
Bystronic Laser AG/First Cut study tour I was the guest of Bystronic Laser AG and its sole South African distributor First Cut when First Cut employees and 11 clients took part in the 2015 Competence Day programme at the beginning of June 2015, before visiting three of Bystronic’s clients in Switzerland to view the company’s equipment in a ‘live’ situation.
When i compete in a match i have to submit all my gear for a “cheat and safety inspection” beforehand.