|
C06 (GF-6060) Main Collocation |
|||
|
Articles |
Specification | Brand | |
|
Linear Motor |
ULMAC3, ULMCC2 |
XL |
|
|
Grating ruler reading head |
Resolution 0.5μm/1μm(option) |
Spain |
|
|
Driver |
SCFD-4D52AEB2, SCFD-0062AEB2 |
Dynahead |
|
|
Z axis screw red module |
XL-80h-s100 |
XL |
|
|
Cutting head |
BT230 |
Raytools |
|
|
Precision linear guide |
- |
Hiwin |
|
|
Marble |
1800*1350*200 |
Shangdong |
|
|
Dust cover |
Standard |
Raytools |
|
|
Main parameters |
|||
| Working area |
600mm*600mm |
||
| Maximum acceleration |
2-5G |
||
| X-axis rapid movement speed |
60m/min |
||
| X-axis effective stroke |
600mm |
||
| X-axis positioning accuracy |
±0.01mm |
||
| X repeat accuracy |
±0.004mm |
||
| Y-axis fast moving speed |
60m/min |
||
| Y-axis effective stroke |
600mm |
||
| Y-axis positioning accuracy |
±0.01mm |
||
| Y repeat accuracy |
±0.004mm |
||
| Z axis travel |
100mm |
||
|
Working ambiance |
|||
| Working temperature |
-10℃·45℃ |
||
| Relative humidity |
<90% No condensation |
||
| Surroundings |
Ventilation, no major vibration |
||
| Voltage |
3x380V±10% 220V±10% |
||
| Power frequency |
50HZ |
||
/
High Speed and High precision Fiber Laser Cutting Machine
For Gold / Sliver with linear motor
C06 (GF-6060) fiber laser cutting machine is mainly for high-speed and high-precision processing of thin metal plate. With mature technology, the whole machine runs stable and is of good cutting efficiency. Since the floor space is about 1850*1400mm, so it is very suitable for small metal processing factory. What’s more, comparing with the traditional machine bed, its high cutting efficiency increased 20%, and it is suitable for cutting all kinds of metal materials.
Machine Highlights
This small size fiber laser cutting machine based on marble table and the aluminum cross beam uses extruded aluminum, so the machine mainframe of good rigidity, high strength and good acceleration, thus effectively prevent the machine structural deformation.
US AheadTech laser cutting CNC system.
Full closed loop feedback, grating ruler ensures processing precision.
EtherCAT bus signal transmission greatly enhanced the machine flexibility and scalability, so it is easy to interconnect with other machines
C06 1200W Fiber Laser Cutting Capacity (Metal Cutting Thickness)
|
Material |
Cutting Limit |
Clean Cut |
|
Carbon steel |
12mm |
10mm |
|
Stainless steel |
5mm |
4mm |
|
Aluminum |
4mm |
3mm |
|
Brass |
4mm |
3mm |
|
Copper |
3mm |
2mm |
|
Galvanized steel |
3mm |
2mm |
|
Gold |
2mm |
2mm |
|
Silver |
1.2mm |
1.2mm |
Linear Motor Type High Precision Laser Cutting Machine Video
Material & Industry Application
Applicable Materials
The machine is used to cut various sheet metal, mainly for stainless steel, carbon steel, manganese steel, copper, aluminum, titanium plates, galvanized sheet, all kinds of alloy plates, rare metals and other materials.
Application industries
sheet metal, jewelry, glasses, machinery and equipment, lighting, kitchen ware, mobile, digital products, electronic components, watches and clocks, computer components, instrumentation, precision instruments, metal molds, car parts, craft gifts and other need accuracty cutting result industries etc.
Machine Technical Parameters
Related products
-
C30
Compact Fiber Laser Cutting Machine Single Table with Cover -
C15 (GF-1510 Precision Euro Design)
Precision Fiber Laser Cutting Machine For Metal Sheet -
C20 (GF-2010)
Small Fiber Laser Cutting Machine Full Closed Cover
Send your message to us:
Write your message here and send it to us